Changelog
Follow up on the latest improvements and updates.
RSS
improved
fixed
SE
Pro
Coord
2.19.3
🔧 Fixes and Improvements:
- SoundSync:UI refinements and performance improvements for Sennheiser Spectera devices.
- SoundSync:Improved connection handling for Sound Devices ARX32 devices.
- Calculation:Custom equipment profiles now have a grid layout for improved editing and management.
- Reports:Custom real-time reports are now included in the SoundBase reports API.
- Live Scan Data:Reliability and performance improvements for the "Stream live data to SoundBase Cloud" option in device settings.
- Global:Improved reliability of the Cloud and Desktop sync system.
- Global:Improved readability and accessibility of Maintenance alerts on touch devices.
new
improved
fixed
SE
Pro
Coord
2.18.2
🚀 New Features:
- Reports (Pro):Real-time reports are now customizable — directly within the real-time reports overview window, you can choose which groups, zones, and sites to include, and are no longer limited to sharing a report from a single one.
- SoundSync:Added the ability to upload and export Sennheiser Spectera configurations. On import, per-device migration options are available to move configurations between systems.
- SoundSync:Added the ability to control and monitor the command button on Sennheiser Spectera SEKs.Requires firmware version 1.4 or higher.
- SoundSync:Added the ability to reorder Sennheiser Spectera mobile devices in both the coordination list and Spectera configuration window.
- Calculation:Added the ability to mark frequencies as "Ignored" to temporarily exclude them from the calculation engine. When removed from the ignored state, Health Check automatically runs to verify the frequency.
🔧 Fixes and Improvements:
- SoundSync:Additional improvements to Lectrosonics DSQD connection reliability when using a manual IP address.
- SoundSync:Improvements to the network interface selector — now reconnects based on hardware identity (MAC address, then interface name) in addition to IP, and added the interface selector to the Monitoring window toolbar.
- Calculation:Additional improvements to the v3 calculation engine, primarily for WMAS equipment profiles.
- Calculation:UI improvements for invalid frequency states, with better distinction between "Invalid" and "Incompatible" frequencies.
- Coordination List:Enhanced the reordering of frequencies within the coordination list by introducing a more intuitive drag-and-drop system.
- Global:Moved the total deployed frequency counter to the Frequency section within the Coord stats panel.
- Global:Further improvements to the Cloud and Desktop sync transport system.
new
SE
Pro
Coord
2.17.1
🚀 New Features:
- SoundSync:Added support for Shure UHF-R devices with full monitoring and control capabilities.
- SoundSync:Added support for Sennheiser G4 series devices with monitoring and control capabilities.
- SoundSync:Added support for Sennheiser G3 series devices with monitoring and control capabilities.
- SoundSync:Added support for Sennheiser 2000 series devices with monitoring and control capabilities.
new
improved
fixed
SE
Pro
Coord
2.16.4
🚀 New Features:
- Calculation:Introducing our new calculation engine v3, rebuilt from the ground up for improved candidate result quality and faster recalculation speeds.
- Calculation:Added Sound Devices Astral frequency authorizations and ARX2 profiles to the default database.
- Calculation:You can now overtype existing frequencies in the coordination list by clicking directly on a frequency and entering a new value. On enter, Health Check will automatically analyze and validate the new frequency.
- SoundSync:Added additional Sennheiser Spectera controls including the ability to change LED colors on antennas and mobile devices, and set phone output modes (standard and balanced) for IEM/IFB SEKs.Requires firmware version 1.4 or higher.
🔧 Fixes and Improvements:
- Calculation:Improvements when adding Sennheiser Spectera 1G4 to your coordination.
- SoundSync:Fixed an issue where multiple sites connected to the same Sennheiser Spectera base station would cause connection issues.
- SoundSync:Fixes and improvements to Lectrosonics DSQD RSSI and battery levels for the monitoring cards.
- Scan Data:Further improvements to the reliability of uploading scan files on SoundBase Desktop without an internet connection.
- Global:Improved project page and Coord application layout on mobile devices for easier navigation and readability.
new
improved
fixed
SE
Pro
Coord
2.15.1
🚀 New Features:
- Calculation:Band plans now support multiple start/stop ranges.
- Calculation:Exclusion thresholds now support multiple start/stop ranges at different threshold values.
- Calculation:Added support for 1.4 GHz Sennheiser Spectera devices.
- Global:Added the ability to sign out of all Cloud devices from the account window.
🔧 Fixes and Improvements:
- Calculation:General improvements to recalculation reliability.
- Calculation:Performance improvements to Health Check when using the Single test window.
- Calculation:Fixed an issue with LMR/SMR exclusions when switching regions within the same project.
- SoundSync:Performance and UX improvements in the Assign window.
- SoundSync:Performance improvements to the external monitoring window.
- SoundSync:Fixed a crash that could occur on the routing page during Sennheiser Spectera configuration.
- SoundSync:Sennheiser Spectera SEKs now show the card image on both microphone and IEM when split apart in the monitoring window.
- Live Scan Data:Improved multi-window workflows for live scanning and monitoring.
- Live Scan Data:Fixed an issue where tinySA Ultra devices would not accept stop frequencies above 900 MHz.
- Global:Fixed an issue where log files could excessively store to disk.
new
improved
fixed
SE
Pro
Coord
2.14.2
‼️ Important:
Scan files are now managed per zone, replacing the previous default scan file workflow. When multiple static and/or live scan files are assigned to the same zone, SoundBase will use the highest peak amplitude value across all active scan sources during calculations. This change provides a simpler, more flexible workflow for managing scan data.
🚀 New Features:
- SoundSync:Added volume lock controls for Sennheiser Spectera mobile device management.
- SoundSync:Added support for custom channel card colors.
- SoundSync:Added support for custom monitoring tab colors.
- SoundSync:Users can now multi-select monitoring cards in Grid and Card Views to perform bulk edits and configuration changes.
🔧 Fixes and Improvements:
- SoundSync:Improved performance and stability when monitoring high channel-count systems in the monitoring window.
- SoundSync:Users can now display different monitoring tabs in separate windows simultaneously.
- SoundSync:Improved telemetry timeline performance and responsiveness.
- SoundSync:General UI enhancements and workflow improvements.
- Remote View:Performance and responsiveness improvements throughout the entire Remote View feature.
- Scan Data:Introduced the new Zone-based scan file workflow and enhanced scan data processing across the platform.
- Live Scan Data:Improved connection reliability for tinySA and tinySA Ultra spectrum analyzers.
- Global:Fixed an issue where support log files could occasionally be saved to the device unnecessarily.
improved
fixed
SE
Pro
Coord
2.13.1
🔧 Fixes and Improvements:
- SoundSync:Improved Sennheiser Spectera connection performance and overall reliability.
- SoundSync:Fixed an issue that could prevent audio and LQI meters from displaying correctly on Sennheiser Spectera SKM transmitters.
- SoundSync:Sennheiser Spectera bi-directional monitoring cards now occupy the width of two standard cards, improving grid alignment and visual consistency.
- SoundSync:Enhanced the layout and usability of the Card View monitoring interface.
- Remote View:Added Card view as a selectable layout option within the Remote View configuration settings.
- Live Scan Data:Added multi-antenna live scanning support for Sennheiser Spectera devices on the spectrum plot. Each scan-enabled antenna port is displayed as an independent trace with configurable visibility, color, and offset settings.
- Assistant:Fixed an issue where searching for scan files through Autopilot could occasionally cause the application to crash.
- Frequency Plot:Fixed an issue where the IMD heat map could fail to display intermodulation products that fell outside the configured minimum or maximum frequency range.
- Global:Implemented security enhancements across both SoundBase Cloud and Desktop applications.
new
fixed
improved
SE
Pro
Coord
2.12.3
🚀 New Features:
- SoundSync:Added control and monitoring support for Sennheiser Spectera base stations, mobile devices, and antennas.
- SoundSync:Added a new Card View monitoring layout that provides a streamlined hybrid between Grid and List views, offering a cleaner interface ideal for A2s and RF technicians who don’t need constant access to detailed technical data.
- Remote View:Added a built-in chat feature that allows SoundBase users to communicate directly with users in Remote View sessions through the browser—no additional applications or accounts required.
- Remote View:Monitoring note cards can now be displayed in Remote View sessions, and remote users are also able to edit the note cards in real time.
- Calculation:Added Sound Devices Astral wireless equipment profiles for 56 additional countries.
- Live Scan Data:Added support for monitoring and controlling Sennheiser Spectera antennas while operating in scanning mode.
- Live Scan Data:Added support for real-time data streaming and remote device control over a network connection for the Owon HSA1000-series spectrum analyzers.Additional SCPI-compatible devices coming soon.
- Frequency Plot:Added the ability to customize the Y-axis scale.
🔧 Fixes and Improvements:
- Scan Data:Improved the reliability of scan file uploads in the Desktop application when operating offline.
- Frequency Plot:Users can now save their preferences.
- Global:Various bug fixes and stability improvements.
new
improved
fixed
SE
Pro
Coord
2.11.7
🚀 New Features:
- SoundSync:Introducing Remote View (Pro) — a smarter way to share wireless hardware telemetry across multiple endpoints without running duplicate software instances. By reducing redundant connections and network traffic, your control network stays efficient while keeping your wireless gear responsive. SoundBase includes a built-in web server that lets you generate shareable links with customizable views for collaborators, engineers, and wireless users anywhere across your show site, while also allowing the server to be hosted on a separate NIC to help isolate your control network. Remote Views can be accessed from virtually any device with a modern web browser — no additional software required.Audio streaming support over Remote View browser links is currently in beta testing and planned for production release in a future update.
- SoundSync: Introducing Audio Monitoring (Pro) — monitor audio on-site in real time by connecting REAPER directly to SoundBase. Access live audio from the monitoring page with flexible soloing and routing options, allowing users to monitor both wireless devices within their SoundBase project and additional audio sources such as lectern microphones, crowd mics, playback tracks, and more. Once REAPER is launched, SoundBase handles the rest automatically — building channels, configuring recordings, and routing audio for you — helping you get your monitoring station up and running faster than ever while reducing the need for multiple applications. Best of all, there are no channel licensing fees or playback recording time limits, it works on both macOS and Windows, and everything can be managed from a single workspace.Audio recording and playback support is currently in beta testing and planned for production release in a future update.
- SoundSync:Added control and monitoring support for Wisycom MAT244 matrix/splitter/combiner.MAT288 coming soon
- SoundSync:Added parameter control for Sennheiser EW-DX.Additional devices coming soon.
- SoundSync:Added control and monitoring support for Sennheiser CHG 70N devices.
- Calculation:You can now hot-swap equipment profiles, band plans, and profile variants directly within the Frequency Details window.
- Calculation:Community equipment profiles — users can now share custom equipment profiles directly through the Profile Manager window, making them discoverable by other SoundBase users and easy to add to personal equipment libraries. This community-driven approach helps build a larger, more comprehensive equipment database over time, especially for less common devices in the field or products that have not yet been added to SoundBase’s default equipment profile list.
🔧 Fixes and Improvements:
- SoundSync:Improved mDNS handling for more reliable device discovery and control.
- Calculation:Sennheiser Spectera is now represented as a wireless device within the calculation engine, bringing support for advanced calculation features such as Time-of-Use and other calculation tools.
- Calculation:Sound Devices Astral equipment profiles now align with firmware restrictions for tuning band selection, with improved recalculation when switching bands between tour stops.
- Global:Various bug fixes and stability improvements.
new
improved
fixed
SE
Pro
Coord
2.10.14
🚀 New Features:
- SoundSync:Added support for Shure Axient Digital in Frequency Diversity mode.Quadversity is partially supported, with expanded functionality planned in a future update.
- SoundSync:Added support for images on grid monitoring cards, making layouts easier to organize and visually scan.
- SoundSync:Added notation cards for comments and notes, making it easier to organize and annotate your workspace.
- SoundSync:Resize cards individually by dragging the bottom-right corner for more flexible layout control.
- SoundSync:Hide columns in the list monitoring view to customize your layout and better fit your monitoring screen.
- Frequency Plot:Added an equipment profile overlay above the spectrum plot, displaying a strip of frequency bars for each coordination profile within the current plot bandwidth.
- Calculation:Added Shure SLXD+ profiles to the default equipment profile list.
- Calculation:Added Q5X PlayerMic, AquaMic, RefMic, CoachMic, PushMic, HatMic, and Incognito profiles to the default equipment profile list.
- Calculation:Expanded the default equipment profile list to include additional ULXD4D and ULXD4Q frequency band variants.
- Scan Data:Scan previews are now visible in search results on hover. Scan files captured within 100 meters of a site are marked with a target icon, making it easier to identify scans taken directly at that location.
🔧 Fixes and Improvements:
- Calculation:Fixed an issue where projects with multiple time-of-use start/stop ranges could behave inconsistently between SE and Pro users.
- Calculation:Improved band plan handling with Health Check for more accurate and reliable results.
- Assistant:Autopilot now delivers more accurate frequency calculations when using custom equipment profiles.
- SoundSync:Refined monitoring card spacing and layout for a cleaner, more consistent experience across all devices.
- SoundSync:Improved battery status readability across all devices.
- SoundSync:The "Add All" devices button now adds devices in ascending IP address order.
- Scan Data:Scan file selections are now synced per zone across all collaborators.
- Live Scan Data:Settings are now available in the external plot window, and snapshot names are automatically prefilled correctly.
- Global:Faster load times and overall performance improvements across both Cloud and Desktop.
- Global:Improved project import speeds by up to 7x.
- Global:Various bug fixes and stability improvements.
Load More
→